1. Support for 8^th Generation Intel^® Core™ i7 processors/Intel^® Core™ i5 processors/Intel^® Core™ i3 processors/Intel^® Pentium^®processors/Intel^® Celeron^® processors in the LGA1151 package.
2. L3 cache varies with CPU.

(Please refer “CPU Support List” for more information.).

1. Intel^® B360 Express Chipset

1. 4 x DDR4 DIMM sockets supporting up to 64 GB of system memory.
2. Dual channel memory architecture.
3. Support for DDR4 2666/2400/2133 MHz memory modules.
4. Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode).
5. Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules.
6. Support for Extreme Memory Profile (XMP) memory modules.
   * To support 2666 MHz or XMP memory, you must install an 8^th Generation Intel^® Core™ i7/i5 processor.

(Please refer “Memory Support List” for more information.)

1. 1 x DVI-D port, supporting a maximum resolution of 1920×1200@60 Hz
   * The DVI-D port does not support D-Sub connection by adapter.
2. 1 x HDMI port, supporting a maximum resolution of 4096×2160@30 Hz
   * Support for HDMI 1.4 version and HDCP 2.2.

Maximum shared memory of 1 GB

1. Realtek^® ALC892 codec
2. High Definition Audio
3. 2/4/5.1/7.1-channel
4. Support for S/PDIF Out

1. Intel^® GbE LAN chip (10/100/1000 Mbit)

1. 1 x PCI Express x16 slot, running at x16 (PCIEX16).
   * For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot.
2. 1 x PCI Express x16 slot, running at x4 (PCIEX4).
3. 1 x PCI Express x1 slot.
   (All of the PCI Express slots conform to PCI Express 3.0 standard.).
4. 1 x M.2 Socket 1 connector for an Intel^® CNVi wireless module only (CNVI)

1. 1 x M.2 connector (Socket 3, M key, type 2242/2260/2280/22110 PCIe x4/x2 SSD support) (M2Q_32G)
2. 1 x M.2 connector (Socket 3, M key, type 2242/2260/2280 SATA and PCIe x2 SSD support) (M2P_16G)
3. 6 x SATA 6Gb/s connectors
   * Refer to “1-7 Internal Connectors,” for the installation notices for the M.2 and SATA connectors.

Intel^® Optane™ Memory Ready

1. 1 x USB 3.1 Gen 2 Type-A port (red) on the back panel
2. 5 x USB 3.1 Gen 1 ports (3 ports on the back panel, 2 ports available through the internal USB header)
3. 6 x USB 2.0/1.1 ports (2 ports on the back panel, 4 ports available through the internal USB headers)
   * The CNVi connector shares bandwidth with the F_USB2 header. When a Wi-Fi module is populated in the CNVi connector, one of the USB 2.0/1.1 ports routed to the F_USB2 header becomes unavailable.

1. 1 x 24-pin ATX main power connector.
2. 1 x 8-pin ATX 12V power connector.
3. 1 x CPU fan header.
4. 3 x system fan headers.
5. 2 x digital LED strip headers.
6. 2 x digital LED strip power select jumpers.
7. 2 x RGB (RGBW) LED strip headers.
8. 6 x SATA 6Gb/s connectors.
9. 2 x M.2 Socket 3 connectors.
10. 1 x front panel header.
11. 1 x front panel audio header.
12. 1 x S/PDIF Out header.
13. 1 x USB 3.1 Gen 1 header.
14. 2 x USB 2.0/1.1 headers.
15. 1 x Trusted Platform Module (TPM) header (2×6 pin, for the GC-TPM2.0_S module only).
16. 1 x serial port header.
17. 1 x Clear CMOS jumper.

1. 1 x PS/2 keyboard/mouse port.
2. 1 x DVI-D port.
3. 1 x HDMI port.
4. 1 x USB 3.1 Gen 2 Type-A port (red).
5. 3 x USB 3.1 Gen 1 ports.
6. 2 x USB 2.0/1.1 ports.
7. 1 x RJ-45 port.
8. 6 x audio jacks.

1. iTE^® I/O Controller Chip.

1. Voltage detection.
2. Temperature detection.
3. Fan speed detection.
4. Overheating warning.
5. Fan fail warning.
6. Fan speed control.
   * Whether the fan speed control function is supported will depend on the cooler you install.

1. 2 x 128 Mbit flash.
2. Use of licensed AMI UEFI BIOS.
3. Support for DualBIOS™.
4. PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0.

1. Support for APP Center.
2. Support for Q-Flash
3. Support for Xpress Install.

1. Norton^® Internet Security (OEM version).
2. cFosSpeed..

1. Support for Windows 10 64-bit.

1. Micro ATX Form Factor; 24.4cm x 23.0cm.

1. Due to different Linux support condition provided by chipset vendors, please download Linux driver from chipset vendors’ website or 3rd party website.
2. Most hardware/software vendors may no longer offer drivers to support Win9X/ME/2000/XP. If drivers are available from the vendors, we will update them on the GIGABYTE website.